Known as: o-ring / o-ring 21,89 x 2,62

View/Change Diagram

911 1989-94 - Engine	911 1994-98 - Engine
911 1994-98 - Engine	911 Turbo/GT2 2001-05 - Engine
911 GT3 2003-05 - Engine

This bursch racing catalytic converter replacement pipe reduces engine damaging heat at the track and increases performance in the mid-range and top end. Like all bursch products, this replacement pipe is coated in high temp. Paint (1,200 degree). Use of this product for purposes other than solely for competition and off-road use is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. This product is intended for racing and off-road vehicles which may never be used on a public road

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shi...(choose a part on the right to read more)

Beautifully chrome-plated stainless steel tail pipe extension. Fits standard exhaust pipe. Great accent, better appearance.

- + 15 crank hp & + 12 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 8.0 lbs. (3.6 kg)
- replaces OEM primary muffler.
- t 304 stainless steel
- 20% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
- completely adjustable for simple installation.
- made in europe.

Tech tip: it's a good idea to replace your primary muffler clamps & hardware with this upgrade. FVD mk9 640 01

Fits: cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedit...(choose a part on the right to read more)

General Fitment

Exhaust straps can become weak and corroded over the years. Be sure to check and replace when necessary. 330 x 27 mm in length. Made for our part #, 170111044. Sold as a set. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

For use on obd1 (94 and earlier) cars only! Only 1 o2 bung is provided. Call for 1995 application. Will not work with multiple o2 sensor cars, like north american cars. (96-98) does not include a TUV-certificate. We recommend using our catalytic installation kit, part # FVDmk993300b please note: not legal for use on california pollution controlled motor vehicles.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This cross over connector replaces original part # 930 111 157 01, it is a quality stainless steel replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For proper installation, we recommend a new exhaust gasket, part # 93011119307 and sealing ring, part # 91111118903 sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ord...(choose a part on the right to read more)

Like new

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

For use on obd1 (94 and earlier) cars only! Only 1 o2 bung is provided. Call for 1995 application. Will not work with multiple o2 sensor cars, like north american cars. (96-98) does not include a TUV-certificate. We recommend using our catalytic installation kit, part # FVDmk993300g please note: not legal for use on california pollution controlled motor vehicles.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

- + 12 crank hp & + 8 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 1.1 lbs. (0.5 kg)
- replaces OEM secondary muffler.
- t 304 stainless steel
- 40% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust.
- made in europe.

Tech tip: it's a good idea to replace your muffler and exhaust tip clamps & hardware with this upgrade. You can order our prepackaged 964 muffler installation kit comprised of genuine Porsche® parts, simply add part # FVD mk9 640 01 to your order.

Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), ...(choose a part on the right to read more)

General Fitment

Improve sound and performance by decreasing exhaust backpressure with this catalytic bypass pipe. This is a painted steel bypass pipe, manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. - + 10 crank hp. - lower, deeper, more exotic exhaust note. - steel coated with high temperature paint. - made in europe by dansk. - reduces back pressure and thermal load on the engine. - includes o2 sensor bung....(choose a part on the right to read more)

FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. But in order to capitalize on all the performance gains the ipd competition plenum can deliver, you must strike a balance with exhaust components and software. You cannot simply add the ipd competition plenum on the 981 series and expect large gains. But, no need to worry, the FVD ...(choose a part on the right to read more)

Like new

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Stainless steel sport catalytic bypass with resonator. The resonator dampens noise, cancels unwanted frequencies and gives the 964 a more pleasing sound.

Increase's performance up to 15 hp.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

This sport muffler is engineered for the discerning Porsche 965 turbo owner who is interested in pure unbridled power and sound. It is hand made from t 321 grade stainless steel. All piping is mandrel bent for reduced backpressure and increased performance. The sport muffler exudes a lower, deeper linear-firing-order dominated flat 6 Porsche turbo sound with added turbo whistle. Exhaust tips are 76 mm (3 inch) polished ovals with a rolled lip. Each kit includes complete installation hardware, wastegate pipe and clamps. Features: gains of up to 10 hp more* t 321 stainless steel mandrel bent new wastegate pipe new gaskets new hardware new muffler clamps *dependent upon boost level and other modifications. Sold in...(choose a part on the right to read more)

FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. But in order to capitalize on all the performance gains the ipd competition plenum can deliver, you must strike a balance with exhaust components and software. You cannot simply add the ipd competition plenum on the 981 series and expect large gains. But, no need to worry, the FVD ...(choose a part on the right to read more)

View/Change Diagram

911 1978-83 - Engine	911 1978-83 - Engine
911 1978-83 - Engine	911 1978-83 - Engine
911 1978-83 - Engine	911 1978-83 - Engine
911 1978-83 - Engine	911 1978-83 - Fuel/Exhaust
911 1978-83 - Fuel/Exhaust	911 1984-86 - Engine
911 1984-86 - Engine	911 1987-89 - Engine
911 1987-89 - Engine	928 1983-86 - Transmission
911 1989-94 - Engine	911 1989-94 - Engine
911 1989-94 - Transmission	911 1994-98 - Transmission

The 997 turbo ipd "y" pipe was built for the more demanding turbo performance customer. The factory y pipe becomes restrictive when adding substantial power gains. The ipd "y" pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory y pipe delivering the additional power needed to raise the performance bar on any turbo. The ipd "y" y pipe is designed to be a direct replacement of the factory OEM y pipe. There are no modifications or fabrication required for installing the ipd y pipe. This is an easy and straight forward r & r (remove and reinstall) bolt on upgrade. Note: contains everything nec...(choose a part on the right to read more)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Known as: sealing ring / sealing ring a 16 x 20

View/Change Diagram

911 1978-83 - Engine	911 1978-83 - Engine
911 1978-83 - Fuel/Exhaust	911 1984-86 - Engine
911 1984-86 - Engine	911 1987-89 - Engine
911 1987-89 - Engine	930 1975-77 - Engine
930 1975-77 - Fuel/Exhaust	928 1978-82 - Engine
928 1978-82 - Engine	928 1978-82 - Engine
928 1978-82 - Engine	928 1978-82 - Fuel/Exhaust
928 1983-86 - Engine	928 1983-86 - Engine
928 1983-86 - Engine	911 1989-94 - Engine

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1984-86 - Engine	911 1987-89 - Engine
944 1989-91 - Engine	911 1989-94 - Engine
968 1992-95 - Engine

Quality replacement bypass pipe for original number, 930 111 003 02 to 06. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. We recommend replacing the gaskets, part # 93012319205 and 93012319406 when installing this pipe. If you have a lazy oxygen sensor, now is the time to replace it to save on labor, part # 96560612601 or 96560612601eq sold individually. 1 necessary per car. Please note: please check the mode...(choose a part on the right to read more)